Services

C, Si, Mn, P, S, Cr, Ni, Mo, Cu, Al etc.

An Identification of Plastic Material service accurately determines the specific polymer type and composition of a given plastic sample using various methods, including physical tests (visual, touch, density), chemical analysis (FTIR spectroscopy, solvent tests), and the observation of burning characteristics (flame color, smell, dripping). This service is used for quality control, product development, failure analysis, reverse engineering, and ensuring regulatory compliance.

Plastics and polymer testing services assess materials to verify quality, performance, and compliance with standards, covering mechanical, thermal, chemical, electrical, and physical properties. These services ensure materials meet application-specific requirements, support process development, and assist in material identification, failure analysis, and regulatory compliance through physical characterization and chemical analysis in accredited laboratories.

Tensile Testing is one of the most important mechanical tests used to evaluate the strength, ductility, and stiffness of materials. By pulling a standardized specimen to fracture using a Universal Testing Machine (UTM), engineers obtain key properties such as Yield Strength, Ultimate Tensile Strength, Elongation, Reduction in Area, and Young's Modulus. Tensile testing is essential for quality control, material certification, design validation, and failure analysis across industries such as automotive, aerospace, construction, metallurgy, and manufacturing.

Microstructure examination is a metallurgical technique used to study the internal structure of metals and alloys. By preparing, polishing, etching, and examining a specimen under a microscope, engineers can evaluate grain size, phases, inclusions, and defects. It is an essential tool for quality control, heat treatment verification, failure analysis, weld inspection, and materials research, helping ensure that components meet performance and reliability requirements.

The Shore D Hardness Test is a simple, rapid, and reliable method for measuring the hardness of hard plastics, rigid polymers, composites, and hard rubber. A spring-loaded sharp conical indenter measures the material's resistance to indentation, and the hardness is reported on a 0–100 Shore D scale. It is widely used in plastics manufacturing, quality control, automotive, electrical, and composite industries.

A permanent load test is a process used to evaluate the performance of a structure, component, or system under a constant, long-term load. The term can refer to two main applications: in engineering, it assesses a structure's ability to withstand a continuous load over time by applying a steady force and observing its response, like deformation or stress corrosion. In software development, it is a type of performance test that measures how an application handles a sustained, realistic user load to identify potential bottlenecks and ensure stability over an extended period.

Service Location Madhya Pradesh , Chhattisgarh And Maharashtra Service Type Metallograpghic Analysis By Scanning Electron Microscope Service Service Mode Offline Payment Mode Online/Offline Parth Metallurgical Services are one of the popular Service Provider for the commendable array of Testing and Measurement Services. Since our incorporation, we are offering optimum quality Chemical analysis Services, Metallurgical Testing Services and Mechanical Testing Service for our valued customers. We are rendering these services with the help of domain professionals following the set industry standards.

Automation Grade Manual Service Type Charpy Impact Tester Service Service Mode Offline Test Method IS 1757 (Part -1) Test method ISO 148 Parth Metallurgical Services are one of the popular Service Provider for the commendable array of Testing and Measurement Services. Since our incorporation, we are offering optimum quality Chemical analysis Services, Metallurgical Testing Services and Mechanical Testing Service for our valued customers. We are rendering these services with the help of domain professionals following the set industry standards.

The Izod and Charpy Impact Tests are standard methods for evaluating the impact toughness of polymers. Both tests use a pendulum hammer to fracture a notched or unnotched specimen and measure the energy absorbed during fracture. The Izod test uses a vertically clamped cantilever specimen, while the Charpy test uses a horizontally supported specimen. These tests are widely used in quality control, material development, and product qualification to ensure that polymer materials have adequate resistance to sudden impact and shock loading.

Capacity 1000 kN Material Mild Steel Payment Terms Online, Offline, UPI Location Nagpur A full-size bolt is a fastener with a full-length threaded shaft and a head for applying torque, with specifications typically including its diameter (M8 for an 8mm diameter), length (20mm in an M8x20 example), and thread pitch (1.0mm for a standard M8 bolt). Its strength is indicated by a grade number stamped on the head, and the bolt's function and fit are determined by its specific dimensions, thread type, and material.

Capacity 1000 kN Material Mild Steel Test Method IS 1367 (Part - 3), IS1367 (Part -6) A Proof Load Test for bolts and nuts verifies a fastener's structural integrity by applying a predetermined load, usually 70-80% of its minimum ultimate tensile strength, to ensure it withstands working loads without permanent deformation or failure. The test involves securing the component in a tensile machine, applying the specified load for a set time, and then checking for any measurable permanent change in length or signs of damage. A successful test demonstrates that the bolt or nut is safe and reliable for its intended use.